Additional Details | Model: 815-3024Pure sine wave output in two 24-voltParallel stacking capability to double the inverter power outputSeries stacking capability enables operation of 240 Vac applicationsAdvanced configuration options for customized applications*Built-in transfer switch automatically transfers between inverter power and incoming AC powerPower factor corrected, multi-stage charger for fast, efficient chargingTemperature compensated charging for a vareity of climate conditionsIgnition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power**Wide operating temperature rangeConformal coated circuit boards for humid environmentsDual input / Dual output AC interface (3000W model)Compatible with the Xantrex Automatic Generator Start*** (Part# 809-0915)Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements The NEW Freedom SW 24 Vdc inverter/charger is packed with features and it is one of the most advanced inverter/chargers in the market today. The Freedom SW features premium sine wave output with high surge capability and temperature compensated, power factor corrected, multi-stage charging to meet power needs of demanding loads including inductive motor loads. The Freedom SW inverter/charger provides utility grade AC power to operate commonly used AC-powered electronics such as plasma television sets, microwaves, entertainment systems, computers, printers, power tools, refrigerators and much more. The Freedom SW offers SERIES and PARALLEL stacking capability to enable twice-the-rated output and operation of 240 Vac applications respectively. Both models are compatible with optional accessories such as the System Control Panel and the Automatic Generator Start. *A System Control Panel is required for all system configuration and setup **When used with the remote panel ***Sold separately Specifications
Electrical Specifications Inverter | Output power (continuous at 40°C) | 3000 W | Surge rating (5 seconds) | 6000 W | Peak output current | 75 A | Output frequency | 60 Hz +/- 0.2 Hz | Output voltage | 120 Vac | Output wave form | Pure sine wave | Optimal efficiency | 94% | No-load power draw (inverting) | < 1.5 Adc | Input DC voltage range | 20 - 32 Vdc | AC connections | Split phase in / dual out | Electrical specifications charger | Output current (continuous at 25°C) | 75 A | Output voltage | 24 Vdc | Output voltage range | 12 - 32 Vdc | Charge Control | 3 stage with manual equalize | Charge temperature compensation | Remote battery sensor (included) | Efficiency | > 85% | AC input power factor (maximum charge) | 0.95 typical | Input current (for maximum charging) | 22 A rms nominal | Input AC voltage | 120 Vac | Input AC voltage range | 85 - 140 Vac | Dead battery charge | > 12 Vdc | General Specifications | Compatible battery types | Flooded / Gel / AGM | Transfer relay rating | 2 legs at 30 A each | Transfer time (AC to inverter and inverter to AC) | < 20 ms | Operating temperature range (full power) | - 4°F to 104°F (- 20°C to 40°C) | Storage ambient temperature range | - 40°F to 185°F (- 40°C to 85°C) | Unit dimensions (H x W x L) | 7.75 x 13.5 x 15.25" (197 x 343 x 387 mm) |
What's in the Box:- SW3024
- Documentation
- battery Temperature sensor
- DC terminal covers (one red, one black) with two sets of #6-32 screw
- Xanbus network terminator x 2
- 5/16"-18 nuts and washers for the DC terminals x 2
|