Product Overview

This Icom M400BB SW Black Box VHF With HM195 White is Presented By Icom.

GENERAL INFORMATION

SKU: ICOM400BBSW

UPC: 4909723150411

Brand: Icom

Manufacturer: ICO

Additional Details

Black Box Transceiver - Icom Quality. Small Footprint.

Space-saving, two-piece configuration

The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMICIV™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.

New intuitive user interface

The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.

Active noise cancelling

The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.

10W Loud Audio, Public Address and Foghorn

The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

Common NMEA Interface

When connected to an external GPS receiver, current position and time are shown on the COMMANDMIC^TM display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.

AIS Target Call with MA-500TR

When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.

Additional features include

MarineCommander™ compatible
AquaQuake™ water draining function
IPX7 submersible protection both for IC-M400BB and HM-195SW (1m depth for 30 minutes)
Dual/tri-watch function for monitoring Ch.16 and/or call channel
Priority and normal scan

Specifications

General
Frequency Range Tx Rx Ch. 70	156.025-157.425MHz 156.050-163.275MHz 156.525MHz
Usable channel groups	INT, USA, CAN and WX channels
Type of emission	16K0G3E (FM), 16K0G2B (DSC)
Power supply requirement	13.8V DC nominal (11.7-15.9V DC)
Current drain (at 7.4V DC) Tx (at 25W output) Rx (Max. audio)	5.5A Max. 3.5A Max.
Operating temperature range	-20 C to +60 C; -4 F to +140 F
Antenna Impedance	50Ω (SO-239)
Dimensions (W H D) IC-M400BB HM-195B/SW	216 79 125mm; 8.5 3.11 4.92 in 67.5 144.5 37mm; 2.66 5.69 1.46 in
Weight (approx.) IC-M400BB HM-195B/SW	830g; 1.83 lb 400g; 14.1 oz
NMEA in/out formats	RMC, GGA, GNS, GLL, DSC, DSE

Transmitter
Output power (Hi/Low)	25W, 1W (High, low)
Max. frequency deviation	5.0 kHz
Frequency tolerance	10ppm
Spurious emissions	Less than -70dBc (at 25W)

Receiver
Sensitivity Main Ch. 70	0.22μV typical (at 12dB SINAD) -5dBμ emf typ. (1% BER)
Squelch sensitivity	Less than 0.32μV
Adjacent Channel Selectivity Main Ch. 70	More than 70dB More than 73dBμ emf (1% BER)
Spurious response Main Ch. 70	More than 70dB More than 73dBμ emf (1% BER)
Intermodulation Main Ch. 70	More than 70dB More than 68dBμ emf (1% BER)
Hum and noise ratio	More than 40dB
Audio output power Internal speaker External speaker	More than 2W (HM-195SW) More than 10W (RX Speaker)