Product Overview

This Fusion Apollo Monoblock Amplifier 650 Watts RMS is Presented By Fusion Electronics.

GENERAL INFORMATION

SKU:

FUS0100228415

UPC:

753759329600

Brand:

Fusion Electronics

Manufacturer:

gar

Additional Details

Model: 010-02284-15

Keep the music going for longer without draining your battery as quickly.

No more manual adjustments to your audio settings. The Easy Tune feature does it for you.

A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating.

These amps have less distortion and noise, so you enjoy quality audio.

Mounting brackets are included for simple installation.

Don’t worry about potential overheating damage with our ignition protection design.

The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel.

These amplifiers use the Easy Tune feature, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments.

Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.

Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature.

Easily install the amplifiers on board with the included mounting brackets.

The ignition protected design helps prevent potential damage from overheating.

The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.

You can connect up to two speakers per channel, increasing setup options.

The amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV.

Specifications

General
Physical dimensions without bracket (LxWxH)	9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
Physical dimensions with bracket (LxWxH)	9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
Weight	4.85 lb (2.2 kg)
Water Rating	IPX2
Amplifier class	Class-D
CEA-2006 power rating	650 watt RMS x 1 @ 14.4 V input - 4 ohm < 1% THD
Total rated power output - 2 ohm (watts)	1100 watt RMS x 1 @ 14.4 V input - 2 ohm < 1% THD
Total rated power output - 4 ohm Bridged (watts)	NA
Peak power (watts)	2000 watts
Input sensitivity	2.15 V RMS
Input impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current draw, in standby/off using amplifier on wire	< 5 mA @ 14.4 V input
Current draw, on, no audio	< 1.15 A @ 14.4 V input
Fuse rating	125 A electronic fuse (no replacement necessary)
Power-cable fuse model and rating	Bussmann™ BK/AMI-030 30 A fast-acting
Ignition Safety Protected (SAE J1171)	Yes
Protection circuits	Reverse voltage Input under/over voltage Over temperature Output short circuit
Operating temperature range	32° to 122° F (0° to 50° C)